View THI2-0513M_4548298.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DC/DC Converters
THI 2M Series, 2 Watt
Features Ultracompact DIP 16 package I/O isolation 4000 VACrms Reinforced insulation rated for working
voltage up to 300 VAC
CB
Scheme
UL 60950-1 UL 60601-1
Industrial & medical safety approval Operating temp. range -25C to +71C Short circuit protection
The THI 2M series is a new range of ultra-compact 2W DC/DC-converters providing a high I/O-isolation voltage of 4000 VAC. With a reinforced I/O-isolation system this product is an economical solution for many applications in instrumentation, industrial controls, medical equipment and everywhere where supplementary- or reinforced insulation is required to meet requested safety standards. Full SMD-design with exclusive use of ceramic capacitors ensure a very high reliability and a long product lifetime.
Models
Ordercode THI 2-0511M THI 2-0512M THI 2-0513M THI 2-0522M THI 2-0523M THI 2-1211M THI 2-1212M THI 2-1213M THI 2-1222M THI 2-1223M THI 2-2411M THI 2-2412M THI 2-2413M THI 2-2422M THI 2-2423M 24 VDC 10% (nominal 24 VDC) 12.0 VDC 10% (nominal 12 VDC) 5.0 VDC 10% (nominal 5 VDC) Input voltage range Output voltage 5 VDC 12 VDC 15 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 12 VDC 15 VDC Output current max. 400 mA 165 mA 133 mA 83 mA 66 mA 400 mA 165 mA 133 mA 83 mA 66 mA 400 mA 165 mA 133 mA 83 mA 66 mA Efficiency typ. 66 % 66 % 66 % 72 % 73 % 66 % 66 % 66 % 74 % 75 % 66 % 66 % 66 % 74 % 75 %
http://www.tracopower.com
Page 1 of 3
DC/DC Converters
THI 2M Series Input Specifications
Input current no load /full load 5 Vin models: 60 mA / 600 mA typ. 12 Vin models: 30 mA / 250 mA typ. 24 Vin models: 15 mA / 125 mA typ. 0.3 A max. 5 Vin models: 1.0 A 12 Vin models: 0.5 A 24 Vin models: 0.2 A 5 Vin models: 9 V max. 12 Vin models: 18 V max. 24 Vin models: 30 V max. internal capacitors 4 % 1 % max. 1.2 % / 1 % change of Vin 10 % max. 12 % max. for 5 Vout models. 150 mVpk-pk max 0.02 %/K 0.5 sec. max. 2 % of rated max. current single output models: 330 F max. dual output models: 100 F max. (each output) - Operating - Storage - Casing -40C to +71C -40C to +125C +90C max. 2.5 %/K above 60C 95 % rel. H max. >2.0 Mio h 4`000 VACrms 6`000 Vpk 2 A max. 20 pF max. (at 100KHz, 1V) >10 Gohm (at 500VDC) 50 - 100 kHz (PFM) IEC/EN 60950-1, UL 60950-1 CSA C22.2 No. 60950-1-03 IEC/EN 60601-1, UL 60601-1, CSA C22.2 No. 601-1 for medical electrical for information technology - CB test report for medical electrical for information technology - CSA certificate equipment equipment equipment equipment www.tracopower.com/products/tsp-csa60601.pdf www.tracopower.com/products/tsp-csa60950.pdf www.tracopower.com/products/tsp-cb60601.pdf www.tracopower.com/products/tsp-cb60950.pdf - Input/Output - Input/Output - Input variation - Load variation 20 - 100 %
2 Watt
Reverse voltage protection Recommanded input fuse (slow blow)
Surge voltage (1 sec. max.)
Input filter
Output Specifications
Voltage set accuracy Voltage balance (dual output models) Regulation
Ripple and noise (20 MHz Bandwidth) Temperature coefficient Short circuit protection Minimum load Capacitive load
General Specifications
Temperature ranges
Derating Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217F @ 25C, ground benign) Isolation voltage (50Hz, 60sec) - Input/Output Isolation test voltage (1 sec.) Leakage current (at 240VAC, 60Hz) Isolation capacity Isolation resistance Switching frequency Safety standards
Safety approvals
All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3
DC/DC Converters
THI 2M Series General Specifications
Casing material Weight Soldering temperature non conductive plastic (UL 94V-0 rated) 5.1 g (0.18oz) max. 265 C / 10 sec
2 Watt
Outline Dimensions
16
1
Pin-Out
Pin 1 7 8 9 Single -Vin (GND) No con. No con. +Vout -Vout +Vin Dual -Vin (GND) No con. Common +Vout -Vout +Vin
23.8
bottom view
(0.60)
15.24
(0.94)
2.54
(0.10)
10 9 0.5 (0.02) 3.2
(0.13)
7 8
10 16
(0.12)
3.0
1.77
(0.07)
10.16 13.7 (0.54)
8.6 (0.34)
Dimensions in [mm], () = Inch Pin diameter: 0.5 0.05 (0.024 0.002) Tolerances: 0.25 (0.01) Pin pitch tolerances: 0.05 (0.002)
Specifications can be changed any time without notice.
Rev. 03/09
Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43 311 45 11 * Fax +41 43 311 45 45 * info@traco.ch * www.tracopower.com
Page 3 of 3

▲Up To Search▲

Price & Availability of THI2-0513M

	To Download THI2-0513M Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .